Attached are 2 pattern images.
Image Item1_V7 shows one pattern of which I need 2 different thickness, I've designated Item# 1 and Item# 2. Image Item3_V7 shows a second pattern of which I need only one thickness, I've designated Item# 3.
I need qty 8 of Item# 1, qty. 16 of Item# 2, and qty. 20 of item# 3.
Grade of aluminum not critical. I may be interested in allowing you to substitute notches cut in from the outer edge instead of the 4 pierced holes shown if that constitutes a significant saving.
1) Material type
Aluminum, no spec. (May also be interested in sets from other materials eg iron / steel, brass/copper/bronze, other)
2) Is a material quote required or is material supplied.
You supply material
3) Quantity
See above
4) Required time frame
Minimum do-able within my tight budget.
Thanks for your time
Len Gould
Image Item1_V7 shows one pattern of which I need 2 different thickness, I've designated Item# 1 and Item# 2. Image Item3_V7 shows a second pattern of which I need only one thickness, I've designated Item# 3.
I need qty 8 of Item# 1, qty. 16 of Item# 2, and qty. 20 of item# 3.
Grade of aluminum not critical. I may be interested in allowing you to substitute notches cut in from the outer edge instead of the 4 pierced holes shown if that constitutes a significant saving.
1) Material type
Aluminum, no spec. (May also be interested in sets from other materials eg iron / steel, brass/copper/bronze, other)
2) Is a material quote required or is material supplied.
You supply material
3) Quantity
See above
4) Required time frame
Minimum do-able within my tight budget.
Thanks for your time
Len Gould