1) 6061 Aluminum 3 inch round stock
2) Material supplied
3) 5-10 pieces
4) would need it in a a month to two months

I know the tolerances on the drawing are super strict but they realy dont have to be that close. Sorry about the crappy drawings. I just learned some basic CATIA on my own.

I would be happy to get you a quote. I have a few questions. What is the smalest diameter through hole, and what tolerances can you live with?

I would be happy to get you a quote. I have a few questions. What is the smalest diameter through hole, and what tolerances can you live with?

Hey thanks. The smallest diameter is 1 inch or 22 mm. The tolerances can be as close as .01 I am not very picky on the tolerances.

huge difference between 1 inch and 22mm The tolerance listed at .01,is that metric or american?

huge difference between 1 inch and 22mm The tolerance listed at .01,is that metric or american?

Metric I meant 25.4 mm sorry bout that.

I would like to offer a quote for these,the tolerance you can live with is .01 in metric(.0004 in english)?Huge price difference between .01 english and .01 metric

I would like to offer a quote for these,the tolerance you can live with is .01 in metric(.0004 in english)?Huge price difference between .01 english and .01 metric

.01 inches (english) sorry bout that. I really dont need it to be that accurate. I really need it to be one piece as it will be holding liquid at temperatures of -100C.

I have changed a few dimensions this is the new design. If you have any questions shoot me a PM or email me mrjake22@gmail.com As said before I am looking to get 5 made up now and possibly 5 in the next few months. I would like to get quotes with and without me supplying material.