Large 6061 Back Plate

Status
Not open for further replies.
L

landmark

New Member
6061 Aluminum.
Raw stock not provided.
10 ea.
3 weeks
RFQ Thursday 3/9/17
Both side have a mating surface so both sides need to be flat.
Original part was created in mm, that is why the SAE measurements are so precise.
I have uploaded a corrected print. Step file available upon request.
 

Attachments

  • large mold backplate.pdf
    94.1 KB · Views: 202
Last edited:
D

depryor

David Wolfe Design, Inc.
landmark said:
Both sides have a mating surface so both sides need to be flat.
Click to expand...
Would you consider cast jig plate with a slight dimensional change? Your dimension of .3543" is 9.0mm. Thickness of both .375" and 10.0 mm is available, +/-.005".
 
Jon Dettloff

Jon Dettloff

New Member
landmark said:
6061 Aluminum.
Raw stock not provided.
10 ea.
3 weeks
RFQ Thursday 3/9/17
Both side have a mating surface so both sides need to be flat.
Original part was created in mm, that is why the SAE measurements are so precise.
I have uploaded a corrected print. Step file available upon request.
Click to expand...

I have a quote ready for you. We're in Michigan and could run this in a couple days. Please email Jon at info@snapjaws.com thanks.
 
C

Catherine

New Member
I am interested to quote for the baseplate. Please advise your email address in order for me to submit my quote.
 
S

Serenity Ridge Machining

New Member
landmark said:
6061 Aluminum.
Raw stock not provided.
10 ea.
3 weeks
RFQ Thursday 3/9/17
Both side have a mating surface so both sides need to be flat.
Original part was created in mm, that is why the SAE measurements are so precise.
I have uploaded a corrected print. Step file available upon request.
Click to expand...

Good afternoon,

Can you please send me a STEP FILE. My Email is greg@serenityridgemachining.com looks like a pretty straight forward part, what flatness are you looking for? Any finishing required?

Thank you,
Greg
 
M

Mike Marquez

New Member
landmark said:
6061 Aluminum.
Raw stock not provided.
10 ea.
3 weeks
RFQ Thursday 3/9/17
Both side have a mating surface so both sides need to be flat.
Original part was created in mm, that is why the SAE measurements are so precise.
I have uploaded a corrected print. Step file available upon request.
Click to expand...
I can quote this quickly. Please email at michael@mastermoldofva.com.
Thank you!

Mike Marquez
Master Mold of VA
Newport News, VA 23605
Office: 757-868-8283
 
vinicius andrade

vinicius andrade

New Member
servicos-de-usinagem-cwb-usinagem-D_NQ_NP_983815-MLB25318561378_012017-F.webp
 
W

Wright Engineering

Wright Technical Services
landmark said:
6061 Aluminum.
Raw stock not provided.
10 ea.
3 weeks
RFQ Thursday 3/9/17
Both side have a mating surface so both sides need to be flat.
Original part was created in mm, that is why the SAE measurements are so precise.
I have uploaded a corrected print. Step file available upon request.
Click to expand...

We are interested in quoting these,
Please send us an email at MFGRESOURCES@WRIGHT-TECHNICAL.COM, so we can send
back a quote.

Thanks

Kevin Wright
 
Status
Not open for further replies.
Top