mold repair/free samples

[chaz6966]

will repair/refurbish or revise your injection molds.
and deliver 100 to 1000 shots for aproval at no charge.
alliance,ohio 44601
cgreen@sareplastics.com

[G Carlson]

Hi - I posted this RFQ with 2 metal axles and one plastic part that could be turned or molded. I would be interested to hear about molding and shooting 1000 parts, per your post - thanks, Gregg

- - -
Sirs:

Please quote 1, 2 , or all 3 of the attached parts:

1. A small eccentric axle of free-turning ss or steel, you supply. One end a plain shaft and one end #10-32 UNF - relief cut OK at base and screwdriver or allen hole on end. Small shoulder for bearing clearance. Flange may be on either end of eccentric. There *may* be a shallow spot drill to aid in swaging over the head in assembly (will delete if possible or costly). Pls quote 500, 1000, 2000.

2. A similar axle, no eccentric. Pls quote 500, 1000, 2000.

3. A plastic wheel of delrin, nylon, or similar rigid plastic, you supply. May machine or mold, and will entertain tooling. Pls quote 500, 1000, 2000.

All parts to be part of a standard assembly to be repeated. Manufacturability changes welcome. Will entertain higher quantities for cost savings. Delivery time not critical; RFQ open about 2 weeks, pls. On-time payer.

Gregg Carlson
gregg.carlson@gmail.com
Tulsa, OK