Large Flanges

[frozen]

Please provide price and availability for the flanges shown in the attached drawings.

Total of 2 flanges
1ea #108 on page 1/2
1ea #109 on page 2/2.

Please note the machining required in detail 2 of each of the 2 pages.

Material grades that may be used: A572-50, A588, or A105

Please provide pricing by Noon on Monday 11/9.

[Matt@RFR]

How are people supposed to get material quotes over a weekend?

[frozen]

Matt,

It is acceptable to exclude material.

Please ensure that your quote clearly indicates if material is included or not

Thanks for the interest

-Pete

[frozen]

Please assume tolerances of +/- 1/32 for all dimensions unless noted otherwise

Thanks

[contract_machining_inc]

Please provide price and availability for the flanges shown in the attached drawings.

Total of 2 flanges
1ea #108 on page 1/2
1ea #109 on page 2/2.

Please note the machining required in detail 2 of each of the 2 pages.

Material grades that may be used: A572-50, A588, or A105

Please provide pricing by Noon on Monday 11/9.

Hi, I don't believe you will find any one on this forum that has a machine big enough to handle your parts. We did but had to down size to keep afloat. We have a local shop that can handle that capacity. If you are serious and not kicking tires I can work with them however, 1 off's are not quote jobs any more. It would be shop rate for the actual time + materials.

[JMWorks]

We have machines large enough to do this, if the RFQ is still open?

[anandh]

euro :4,500 / unit

we are suplly the forged machined flanges
contact mktghpi@gmail.com

Please provide price and availability for the flanges shown in the attached drawings.

Total of 2 flanges
1ea #108 on page 1/2
1ea #109 on page 2/2.

Please note the machining required in detail 2 of each of the 2 pages.

Material grades that may be used: A572-50, A588, or A105

Please provide pricing by Noon on Monday 11/9.

[Steve Juckett]

I can build your large flanges in 2 days and we probably have the material on the ground to do the work. We have $3 Million worth of raw stock on the ground for fast delivery on API Drill Through Equipment. My web link is www.asapind.net My Email address is stevej@asapind.net We do Blow out preventer repair up to 29-3/4" and can put 30,000 on our CNC turn table.
We can pressure test to 20,000#

Thanks,
Steve Juckett
Sales

[frozen]

Thank you for your responses, this has been a pleasant and responsive experience.

The flanges went for ~$2,250/ea to a domestic manufacturer

There was a surprising range in the quotes. ($11,000 to the above stated low).

Thanks again

-Pete

[contract_machining_inc]

Thank you for your responses, this has been a pleasant and responsive experience.

The flanges went for ~$2,250/ea to a domestic manufacturer

There was a surprising range in the quotes. ($11,000 to the above stated low).

Thanks again

-Pete

Pete,
Please post on the quality you got for that price and if the final invoice price matches the quote price.

Regards,
Fred