CNCzone Network:  CNCzone :: 3Dprintforums :: Welderzone :: SiteMap

Page 1 of 2 12 LastLast
Results 1 to 10 of 18

Thread: Screw machine type work

  1. #1
    Registered
    Join Date
    Jan 2008
    Location
    Madison Heights, Mi
    Posts
    1

    Default Screw machine type work

    I have (3) different different parts I would like to get a quote for. They are approx. 1/4" in dia. x 1 1/4" long and need to be produced out of Stainless Steel (303 is the current mat'l.) Two of the parts have a M3x0.5mm OD thread, 7/8ths long and the third has a M3x0.5mm ID thread about 13/16ths deep. There is one diameter has has a bearing on it so that diameter is toleranced pretty tight. All other dimensions would be +/- .005 tolerance.

    I need the prices for the following quantities;
    100pcs
    500pcs
    1000pcs
    5000pcs

    This could potentially turn into a long term job.

    I will send dwgs. to interested qualified parties upon request. Thanks John

  2. #2
    Registered
    Join Date
    Jun 2010
    Location
    Montana
    Posts
    4

    Default

    Hello,

    Please send dwgs to timrobison@ymail.com for quote.

    Thanks
    Tim

  3. #3
    Registered
    Join Date
    Jun 2010
    Location
    Cobourg
    Posts
    1

    Default

    Would you kindly send drawings to following email or fax, and I will quote accordingly.
    Thank you
    Vaughn Shaw
    Advanced Machining
    905-352-3658 fax
    vaughnsfile@hotmail.ca

  4. #4
    Registered
    Join Date
    May 2010
    Location
    Walnut, California
    Posts
    1

    Default

    Hi, please send drawings to the following email or fax, and we will quote ASAP.

    symtekmachinery@gmail.com
    fax: 1-888-788-4415

    Thanks,

    John

  5. #5
    Registered
    Join Date
    Jun 2010
    Location
    Phoenix Arizona
    Posts
    7

    Default

    Greetings,

    Please send drawings to lamendoza123@hotmail.com

    Thank you

  6. #6
    Registered
    Join Date
    Jun 2010
    Location
    Phoenix Arizona
    Posts
    7

    Default

    Greetings,

    Can you please send the drawings to lamendoza123@hotmail.com

    Thank you

  7. #7
    Registered
    Join Date
    Jun 2010
    Location
    ISTANBUL/TURKEY
    Posts
    3

    Default

    Dear John,
    Please send your drawings to quote

    akin
    akinceko@gmail.com

  8. #8
    Registered
    Join Date
    Jan 2006
    Location
    Northern New York
    Posts
    18

    Default

    We just recently setup a new swiss type machine and would like the opportunity to quote for you.

    Thanks,
    Chad

    http://northernmachininginc.com

    nmi@northernmachininginc.com

  9. #9
    Registered rweisbarth23's Avatar
    Join Date
    Nov 2006
    Location
    Cleveland, OH
    Posts
    14

    Default

    We would like the opportunity to quote in these parts. Please e-mail or fax prints. Do not hesitate to view our website demonstrating our capabilities.

    Regards,
    Ray Weisbarth

  10. #10
    Registered
    Join Date
    Apr 2009
    Location
    PA
    Posts
    53

    Default

    Interested in this job would apreciate it if could send drawings and all information to the email address t.labs@yahoo.com

    Thanks
    TML MACHINING.

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •