304 stainless manifold

Status
Not open for further replies.

mklod

Member
required immediately; latest delivery by 9/5 (faster is better)

we have already produced 5+ of these, so fitment of all components has already been tested

major features: manifold will house an insert check valve; 1/4-28 barb fitting will be screwed into right side; 10-32 bleed screw will be screwed into top
tight tolerance on bar stock (±0.012")
no other rigid tolerance requirements
material type: stainless 304 (not supplied)
quantity: 5 (minimum of 25 is also acceptable); more to follow (100+ by December 2015)


MANIFOLD SPECS (side view)
View attachment manifold v6.1.pdf

CARTRIDGE INSERT CHECK VALVE SPECS (installation hole dimensions)
View attachment Lee_IMH-page09.pdf

PREVIOUSLY-USED 304 STOCK
http://www.mcmaster.com/#89415k27/=yolyao


If any clarification is needed, just ask!

Thanks,

Mike
 
Last edited:

WKBates

New Member
required immediately; latest delivery by 9/5 (faster is better)

we have already produced 5+ of these, so fitment of all components has already been tested

major features: manifold will house an insert check valve; 1/4-28 barb fitting will be screwed into right side; 10-32 bleed screw will be screwed into top
tight tolerance on bar stock (±0.012")
no other rigid tolerance requirements
material type: stainless 304 (not supplied)
quantity: 5 (minimum of 25 is also acceptable); more to follow (100+ by December 2015)


MANIFOLD SPECS (side view)
View attachment 3086

CARTRIDGE INSERT CHECK VALVE SPECS (installation hole dimensions)
View attachment 3087

PREVIOUSLY-USED 304 STOCK
http://www.mcmaster.com/#89415k27/=yolyao


If any clarification is needed, just ask!

Thanks,

Mike

I would like to submit a bid for 25 pcs.; bill@cattech-machining.com
Can get on them immediately.
Bill
 

pagstudio

New Member
required immediately; latest delivery by 9/5 (faster is better)

we have already produced 5+ of these, so fitment of all components has already been tested

major features: manifold will house an insert check valve; 1/4-28 barb fitting will be screwed into right side; 10-32 bleed screw will be screwed into top
tight tolerance on bar stock (±0.012")
no other rigid tolerance requirements
material type: stainless 304 (not supplied)
quantity: 5 (minimum of 25 is also acceptable); more to follow (100+ by December 2015)


MANIFOLD SPECS (side view)
View attachment 3086

CARTRIDGE INSERT CHECK VALVE SPECS (installation hole dimensions)
View attachment 3087

PREVIOUSLY-USED 304 STOCK
http://www.mcmaster.com/#89415k27/=yolyao


If any clarification is needed, just ask!

Thanks,

Mike
was this job filled if not love to billed the or another
contact pagstudio@yahoo.com or lubberschris@yahoo.com
Thanks Kevin Lubbers

Sent from my SM-G900V using Tapatalk
 

mklod

Member
UPDATE 9/23/2015: Revised design.

The only difference from previous design is the 1/4-28 threads have been replaced with a tapered hole. The tapered hole does NOT have threads.

View attachment manifold v3.pdf

Need one (qty=1) of each new version delivered as soon as possible. Material unsupplied. 5/8" square bar stock. Prototype can be aluminum.

Once we confirm fitment, will order qty=25 in 304 stainless steel.

For quickest response, please email mike.klodnicki@singularityu.org

Thanks,

Mike
 

pagstudio

New Member
UPDATE 9/23/2015: Revised design.

The only difference from previous design is the 1/4-28 threads have been replaced with a tapered hole. The tapered hole does NOT have threads.

View attachment 3118

Need one (qty=1) of each new version delivered as soon as possible. Material unsupplied. 5/8" square bar stock. Prototype can be aluminum.

Once we confirm fitment, will order qty=25 in 304 stainless steel.

For quickest response, please email mike.klodnicki@singularityu.org

Thanks,

Mike
Unable to see the specs would like to bid this.

email us at pagstudio@yahoo.com

Thanks

Kevin Lubbers

Sent from my SM-G900V using Tapatalk
 

MARION

New Member
Are you looking to just purchase the manifold, and you will be installing the check valve?

Thank you, Marion
 
Status
Not open for further replies.
Top