Request For Quote- 200 pcs quick turn brass parts

Status
Not open for further replies.

mklod

Member
Material will not be provided. Need 200 pcs of each part (2 separate parts). 3D files available upon request.

Ideally, these will be produced immediately and received by this Saturday. Quotes open until this Saturday (11/4).

Price/lead time to beat: $600 total; 13 days total including shipping (China). A higher cost but faster lead time is perfectly acceptable.

Note: we have been looking for a machining partner local to the SF Bay Area. If you are capable of quick-turn jobs, let's talk more.
 

Attachments

  • _Center Contact Rev1.1 - 6.75mm height.PDF
    32.4 KB · Views: 225
  • Body rev1.1.PDF
    34.5 KB · Views: 171
Material will not be provided. Need 200 pcs of each part (2 separate parts). 3D files available upon request.

Ideally, these will be produced immediately and received by this Saturday. Quotes open until this Saturday (11/4).

Price/lead time to beat: $600 total; 13 days total including shipping (China). A higher cost but faster lead time is perfectly acceptable.

Note: we have been looking for a machining partner local to the SF Bay Area. If you are capable of quick-turn jobs, let's talk more.


If you want a US partner, there's a lot more that goes into it than just beating price. Look up the reshoring initiative. We are open to bid this job, but not as a bargain basement vendor. We pride ourselves on long term partnerships, quality and a great price. If you are looking for a local shop we can beat the time, by 7 days, but won't beat that price.

redlinemachine.com
 

J-Rod10

New Member
Been repairing a lot of Chinese work lately. Half the work of starting from scratch, nearly as much money as starting from scratch.
 

SigmaSixEng

Better by Design
If you want a US partner, there's a lot more that goes into it than just beating price. Look up the reshoring initiative. We are open to bid this job, but not as a bargain basement vendor. We pride ourselves on long term partnerships, quality and a great price. If you are looking for a local shop we can beat the time, by 7 days, but won't beat that price.

redlinemachine.com

Well Said
 

WKBates

New Member
Material will not be provided. Need 200 pcs of each part (2 separate parts). 3D files available upon request.

Ideally, these will be produced immediately and received by this Saturday. Quotes open until this Saturday (11/4).

Price/lead time to beat: $600 total; 13 days total including shipping (China). A higher cost but faster lead time is perfectly acceptable.

Note: we have been looking for a machining partner local to the SF Bay Area. If you are capable of quick-turn jobs, let's talk more.
I am in Ohio, would like to submit a bid.
Bill
 

Wright Engineering

Wright Technical Services
Material will not be provided. Need 200 pcs of each part (2 separate parts). 3D files available upon request.

Ideally, these will be produced immediately and received by this Saturday. Quotes open until this Saturday (11/4).

Price/lead time to beat: $600 total; 13 days total including shipping (China). A higher cost but faster lead time is perfectly acceptable.

Note: we have been looking for a machining partner local to the SF Bay Area. If you are capable of quick-turn jobs, let's talk more.
 

gpcinc

Member
Also we would like to add that we can beat the delivery time by 8 days and can beat the price by $100. Contact us today, P.O. today = parts to you on Monday, 11/7/16. Wright Technical Services Inc, 1-855-933-6633 Ext. 0.

You are not allowed to post quoted pricing to a potential customer on this site
 

Katy

New Member
Material will not be provided. Need 200 pcs of each part (2 separate parts). 3D files available upon request.

Ideally, these will be produced immediately and received by this Saturday. Quotes open until this Saturday (11/4).

Price/lead time to beat: $600 total; 13 days total including shipping (China). A higher cost but faster lead time is perfectly acceptable.

Note: we have been looking for a machining partner local to the SF Bay Area. If you are capable of quick-turn jobs, let's talk more.
Hello Chris
Could you send us your email address please,atlanticae@hotmail.com
Cheers!
MS
we have been looking for a machining partner local to the SF Bay Area. If you are capable of quick-turn jobs, let's talk more.

Dear ,
Could you plz advice your email address,thanks !


Best regards!

Katy Li


Dongguan HuaLai Precision Machinery Co.,LTD

Dongguan city ,Guangdong province,China

E-mail:liyelin@dghualai.com

http://www.dghualai.com
 
Status
Not open for further replies.
Top