Request For Quote- Plastic hole milling

Status
Not open for further replies.

curlyQ

New Member
Hello all,
First time posting here so I hope I'm doing this correctly. I have 30 plastic dishes of which I need a hole milled into the center of each. I do not know the exact material they are made from, it’s most likely a polymer resin like HDPE or PET. Each one is 8.5” in diameter and ~0.02” thick. I will need a 2.9” diameter hole cut into the center. I have a PDF (and Illustrator) file with a 2D rendering of the project dimensions but no CAD files. The materials will be supplies and shipped to you for milling. My time frame is flexible: anytime within two weeks would be ideal. Also, the milled edges do not need any special finish beyond deburring (if possible). Thanks!
 

MarkS

New Member
Hello all,
First time posting here so I hope I'm doing this correctly. I have 30 plastic dishes of which I need a hole milled into the center of each. I do not know the exact material they are made from, it’s most likely a polymer resin like HDPE or PET. Each one is 8.5” in diameter and ~0.02” thick. I will need a 2.9” diameter hole cut into the center. I have a PDF (and Illustrator) file with a 2D rendering of the project dimensions but no CAD files. The materials will be supplies and shipped to you for milling. My time frame is flexible: anytime within two weeks would be ideal. Also, the milled edges do not need any special finish beyond deburring (if possible). Thanks!
Can you email the drawing to marks@flexmachine.net. Where are you located?
 

Tjcnc

New Member
Hello all,
First time posting here so I hope I'm doing this correctly. I have 30 plastic dishes of which I need a hole milled into the center of each. I do not know the exact material they are made from, it’s most likely a polymer resin like HDPE or PET. Each one is 8.5” in diameter and ~0.02” thick. I will need a 2.9” diameter hole cut into the center. I have a PDF (and Illustrator) file with a 2D rendering of the project dimensions but no CAD files. The materials will be supplies and shipped to you for milling. My time frame is flexible: anytime within two weeks would be ideal. Also, the milled edges do not need any special finish beyond deburring (if possible). Thanks!

Hello all,
First time posting here so I hope I'm doing this correctly. I have 30 plastic dishes of which I need a hole milled into the center of each. I do not know the exact material they are made from, it’s most likely a polymer resin like HDPE or PET. Each one is 8.5” in diameter and ~0.02” thick. I will need a 2.9” diameter hole cut into the center. I have a PDF (and Illustrator) file with a 2D rendering of the project dimensions but no CAD files. The materials will be supplies and shipped to you for milling. My time frame is flexible: anytime within two weeks would be ideal. Also, the milled edges do not need any special finish beyond deburring (if possible). Thanks!
Hi there. Please send drowings to tjcncmachining@gmail.com for a quote. Thomas. Thanks
 
Status
Not open for further replies.
Top