Small Job Quote Needed 0.100" Aluminum 7075 sheet 2D Milling

Status
Not open for further replies.

DrCalculator

New Member
Hi All,

I'm looking to have a chassis for a robot cut from 0.100" 7075 T6 aluminum, which I can provide. It is 8.6064" X 7.277". I am looking for 3 parts, which I believe should easily fit on a 12" X 24" sheet (customer provided if you want, just give me your address and I'll have it shipped).

Attached is a picture and 3D igs file. Let me know if you need a different format.

Thanks!
 

Attachments

  • Chassis_top-bottom.JPG
    Chassis_top-bottom.JPG
    138.5 KB · Views: 104
  • Chassis_top-bottom (2).zip
    341.6 KB · Views: 67

Trey McCreary

New Member
Hi All,

I'm looking to have a chassis for a robot cut from 0.100" 7075 T6 aluminum, which I can provide. It is 8.6064" X 7.277". I am looking for 3 parts, which I believe should easily fit on a 12" X 24" sheet (customer provided if you want, just give me your address and I'll have it shipped).

Attached is a picture and 3D igs file. Let me know if you need a different format.

Thanks!
I would like to quote this for you. I have a small shop in Mansfield Texas. Please email me at cncprecisionprograms@yahoo.com.
 

MarkS

New Member
Hi All,

I'm looking to have a chassis for a robot cut from 0.100" 7075 T6 aluminum, which I can provide. It is 8.6064" X 7.277". I am looking for 3 parts, which I believe should easily fit on a 12" X 24" sheet (customer provided if you want, just give me your address and I'll have it shipped).

Attached is a picture and 3D igs file. Let me know if you need a different format.

Thanks!
 

MarkS

New Member
I am interested in quoting/machining these plates for you.
If you email me you contact information I will get a quote
to you.

Mark Schrader
Flex Machine & Tool LLC
503-593=8370
www.flexmachine.net
 

Mike Marquez

New Member
Hi,
Please send files and we can have that quoted. We do a lot of cutting, especially with 7075 Al. Its a lot tougher than 6061 and we would love to help. Thanks for reading.

Mike Marquez
Master Mold of Va, LLC
5875 Jefferson Ave.
Newport News, VA 23605
michael@mastermoldofva.com
Office: 757-868-8283
 
Status
Not open for further replies.
Top