Quick Quote Needed 4 simple parts, need 5/10 of each

Status
Not open for further replies.
amasters

amasters

Thermo_man
Hello again,

I have 4 fairly simple parts to be machined;
2 are just copper heat sinks that need holes drilled and/or tapped in them - I provide the heat sinks.
1 is just a simple small block of copper 1.25 x1.25 x.25"
and the last is just 1/16 thick sheet metal part with a cut out and 9 holes.

I provide the heatsinks - all that is needed on them is holes per the drawings.

You provide the copper for the block and the Alum 6061 for the sheet part.
I pay shipping.

Please quote as 5 pieces and 10 pieces of each part.

I want to award this in just a few days. I need these in two weeks of award.

If you see anything that would help make these parts machine faster/bring the cost down, then let me know. I'm open to any suggestions.

Thanks,

Andy
amasters(at)customthermoelectric(dot)com
 

Attachments

  • HS-60-60-30-CU_101 TOP copper heat sink.pdf
    158.6 KB · Views: 166
  • HS-60-60-30-CU_102 BASE copper heat sink.pdf
    135.5 KB · Views: 99
  • Extender Block 125x125x025 Copper.pdf
    51.1 KB · Views: 113
  • Mounting Plate 4x4x063.pdf
    54.3 KB · Views: 130
R

Robert E. Gregory

New Member
AMPC, rgregory@dcampc.com

Andy,

I am creating a quote for you on these parts. Is this a "one-time" project? Or, is there an annual usage beyond 5 or 10 parts?

Thanks!

Bob
 
amasters

amasters

Thermo_man
Bob,

I have not sold these before so I am not really sure how often I will need them. I could be back in two months for more.

I think for your purpose, treat them as just this time.

Andy
 
S

Sonichuskerdu

New Member
amasters said:
Hello again,

I have 4 fairly simple parts to be machined;
2 are just copper heat sinks that need holes drilled and/or tapped in them - I provide the heat sinks.
1 is just a simple small block of copper 1.25 x1.25 x.25"
and the last is just 1/16 thick sheet metal part with a cut out and 9 holes.

I provide the heatsinks - all that is needed on them is holes per the drawings.

You provide the copper for the block and the Alum 6061 for the sheet part.
I pay shipping.

Please quote as 5 pieces and 10 pieces of each part.

I want to award this in just a few days. I need these in two weeks of award.

If you see anything that would help make these parts machine faster/bring the cost down, then let me know. I'm open to any suggestions.

Thanks,

Andy
amasters(at)customthermoelectric(dot)com
Click to expand...

I would be glad to Quote your prototype work. Please e-mail BELZNER@ESPRECISION.COM with prints or drawings.
All parts go through a complete cmm inspection before leaving our shop. Tolerance reports and certifications are available upon request for up to one year. We also have a complete quality controll system in place, and are working towards iso9000 certification in the near future.
Please take a look at our facilities at www.esprecision.com
 
J

joking

www.machinepier.com
Hi,

Please send the files to service@machinepier.com. We will give you a good price.

Our company is involved in online manufacturing service for several years. We can provide the high quality and competitive price in the fields of online machining service and cutting tools. We have over 1500 customers located in more than 40 countries. They are very happy with our quality, service as well as price.
Please visit http://www.machinepier.com/ for more details about our products and services.
 
amasters

amasters

Thermo_man
Job has been awarded - Thank you

This job has been awarded. Thank you to all those that submitted quotes.

Andy
 
Status
Not open for further replies.
Top