Request For Quote- Knurled Shaft Collar - 500pcs

wrathmachine

New Member
Please quote 500pcs - reorders likely.

303 or 304 - whichever is cheaper / easier to machine.

1/2" bore can probably be drilled, but it needs an easy slide fit on an on-size 1/2" shaft.

Looks like a Fine Knurl - will confirm and/or can provide a sample.
It also looks like the diamonds are not sharp/complete is ok...

Length tolerance -0.0 +.005

OD knurl swell is no problem.

Include ETA -

Shipping to 37374 would be helpful

Thanks for your interest,

please contact:
wrathmachine7@yahoo.com
 

Attachments

  • Take-Off Pot Roller.pdf
    88.5 KB · Views: 56

Alexle89

New Member
Hi wrathmachine,

Please check your email. We have sent you a quote for Knurled Shaft Collar.
Please quote 500pcs - reorders likely.

303 or 304 - whichever is cheaper / easier to machine.

1/2" bore can probably be drilled, but it needs an easy slide fit on an on-size 1/2" shaft.

Looks like a Fine Knurl - will confirm and/or can provide a sample.
It also looks like the diamonds are not sharp/complete is ok...

Length tolerance -0.0 +.005

OD knurl swell is no problem.

Include ETA -

Shipping to 37374 would be helpful

Thanks for your interest,

please contact:
wrathmachine7@yahoo.com
 
Top