Request For Quote- Pulley Machining - Aluminum For Blanket Po

A&B · Feb 6, 2019

Hello,

We are in the market for a quite extensive pulley machining job. We want to blanket these out through July of this year in groups of ten each. These would be on an as needed basis and won't have any hard dates. Please quote delivered price. The AB-9778 and AB-9779 go hand and hand with each other. It is the same that the AB-9777 and AB-9776 go hand and has as well. so we would always take one with the other in groups of ten. Please quote this with a maximum shipping cost for the entire PO or just include free shipping. We would take lots of ten of each pulley of the ones that go hand and hand.

AB-9778 (50 PIECES) taken in groups of ten
AB-9779 (50 PIECES) taken in groups of ten
AB-9776 (50 PIECES) taken in groups of ten
AB-9777 (50 PIECES) taken in groups of ten

A&B Packing Equipment
732 West St. Joseph Street
Lawrence, MI 49064
josh.schulz@abpacking.com
269-539-4700

I have updated the contact information to show the person in charge of the project.

LuisFM · Feb 6, 2019

Where would these be shipped to I want to get a quote started for you please email me any more details to luismendezsalesco@gmail.com

A&B · Feb 6, 2019

A&B Packing Equipment
732 West St. Joseph Street
Lawrence, MI 49064

You can email to ed.madsen@abpacking.com

Lawrence · Feb 6, 2019

A&B said: ↑

A&B Packing Equipment
732 West St. Joseph Street
Lawrence, MI 49064
Click to expand...

BL Industries LLC will have a quote over shortly

Chuck S · Feb 6, 2019

A&B said: ↑

Hello,

We are in the market for a quite extensive pulley machining job. We want to blanket these out through July of this year in groups of ten each. These would be on an as needed basis and won't have any hard dates. Please quote delivered price. The AB-9778 and AB-9779 go hand and hand with each other. It is the same that the AB-9777 and AB-9776 go hand and has as well. so we would always take one with the other in groups of ten. Please quote this with a maximum shipping cost for the entire PO or just include free shipping. We would take lots of ten of each pulley of the ones that go hand and hand.

AB-9778 (50 PIECES) taken in groups of ten
AB-9779 (50 PIECES) taken in groups of ten
AB-9776 (50 PIECES) taken in groups of ten
AB-9777 (50 PIECES) taken in groups of ten
Click to expand...

Where would you like a quote sent to?

Cade Roberts · Feb 6, 2019

I have a quote ready for you. Just need an email to send it too.

Konner Moshier · Feb 7, 2019

A&B said: ↑

Hello,

We are in the market for a quite extensive pulley machining job. We want to blanket these out through July of this year in groups of ten each. These would be on an as needed basis and won't have any hard dates. Please quote delivered price. The AB-9778 and AB-9779 go hand and hand with each other. It is the same that the AB-9777 and AB-9776 go hand and has as well. so we would always take one with the other in groups of ten. Please quote this with a maximum shipping cost for the entire PO or just include free shipping. We would take lots of ten of each pulley of the ones that go hand and hand.

AB-9778 (50 PIECES) taken in groups of ten
AB-9779 (50 PIECES) taken in groups of ten
AB-9776 (50 PIECES) taken in groups of ten
AB-9777 (50 PIECES) taken in groups of ten

A&B Packing Equipment
732 West St. Joseph Street
Lawrence, MI 49064
josh.schulz@abpacking.com
269-539-4700

I have updated the contact information to show the person in charge of the project.
Click to expand...

My name is Konner Moshier. I represent a manufacturing company called MAKstride. We are ISO 9001:2015 certified and we would like to quote this. You can check out our website at www.makstride.com to learn more about what we do. We will get started on this quote right away. If you have any other information please email me at konner@makstride.com

robsys · Feb 7, 2019

A&B said: ↑

Hello,

We are in the market for a quite extensive pulley machining job. We want to blanket these out through July of this year in groups of ten each. These would be on an as needed basis and won't have any hard dates. Please quote delivered price. The AB-9778 and AB-9779 go hand and hand with each other. It is the same that the AB-9777 and AB-9776 go hand and has as well. so we would always take one with the other in groups of ten. Please quote this with a maximum shipping cost for the entire PO or just include free shipping. We would take lots of ten of each pulley of the ones that go hand and hand.

AB-9778 (50 PIECES) taken in groups of ten
AB-9779 (50 PIECES) taken in groups of ten
AB-9776 (50 PIECES) taken in groups of ten
AB-9777 (50 PIECES) taken in groups of ten

A&B Packing Equipment
732 West St. Joseph Street
Lawrence, MI 49064
josh.schulz@abpacking.com
269-539-4700

I have updated the contact information to show the person in charge of the project.
Click to expand...

Tek4UFast located in Michigan will provide a quote..... I've quoted for Ed in the past. You can see our capabilities at www.Tek4UFast.com we are an automation shop with full machining capability. Best Regards, Bill Robinson

Allen LaMarche · Feb 11, 2019

Quote is on the way!

Allen D.LaMarche
General Manager
Sterling Gear, Inc.
Phone(815)438-4327
Fax(815)438-5019
Email: sterlinggear@thewisp.net
Website: sterling-gear-inc.business.site

Tristin Drury · Feb 24, 2019

Is this job currently open for quote?

Sam Tebcherany · Feb 26, 2019

I have sent an email with the quote to Ed Madsen. let me know if i need o re-route the email. thanks

khood · Feb 28, 2019

A&B said: ↑

Hello,

We are in the market for a quite extensive pulley machining job. We want to blanket these out through July of this year in groups of ten each. These would be on an as needed basis and won't have any hard dates. Please quote delivered price. The AB-9778 and AB-9779 go hand and hand with each other. It is the same that the AB-9777 and AB-9776 go hand and has as well. so we would always take one with the other in groups of ten. Please quote this with a maximum shipping cost for the entire PO or just include free shipping. We would take lots of ten of each pulley of the ones that go hand and hand.

AB-9778 (50 PIECES) taken in groups of ten
AB-9779 (50 PIECES) taken in groups of ten
AB-9776 (50 PIECES) taken in groups of ten
AB-9777 (50 PIECES) taken in groups of ten

A&B Packing Equipment
732 West St. Joseph Street
Lawrence, MI 49064
josh.schulz@abpacking.com
269-539-4700

I have updated the contact information to show the person in charge of the project.
Click to expand...

Good morning I was wondering if this project is still open for quotes.

Jonathan Williams · Mar 4, 2019

Chuck S said: ↑

Where would you like a quote sent to?
Click to expand...

Hello not sure if you have filled this or not. Regardless please reach out to Jon Williams at M and M Machine for future needs. 530-268-2112.

Chris Norris · Mar 6, 2019

Please let me know if this job is closed. L & K Machining, Inc. would like to quote for you. Please contact Chris Norris at lkmach@netpath.net.

ACEIND · Mar 7, 2019

A&B said: ↑

Hello,

We are in the market for a quite extensive pulley machining job. We want to blanket these out through July of this year in groups of ten each. These would be on an as needed basis and won't have any hard dates. Please quote delivered price. The AB-9778 and AB-9779 go hand and hand with each other. It is the same that the AB-9777 and AB-9776 go hand and has as well. so we would always take one with the other in groups of ten. Please quote this with a maximum shipping cost for the entire PO or just include free shipping. We would take lots of ten of each pulley of the ones that go hand and hand.

AB-9778 (50 PIECES) taken in groups of ten
AB-9779 (50 PIECES) taken in groups of ten
AB-9776 (50 PIECES) taken in groups of ten
AB-9777 (50 PIECES) taken in groups of ten

A&B Packing Equipment
732 West St. Joseph Street
Lawrence, MI 49064
josh.schulz@abpacking.com
269-539-4700

I have updated the contact information to show the person in charge of the project.
Click to expand...

ACEIND · Mar 7, 2019

Coreyhager@aceindustrial.net

859-854-3715

Is this job still open?

We specialize in custom tooling, CNC machining, automation, and mechanical design.

Log in / Register

Forums

Request For Quote- Pulley Machining - Aluminum For Blanket Po

A&B

Attached Files:

AB-9779.pdf

AB-9778.pdf

AB-9776.pdf

AB-9777.pdf

LuisFM

A&B

Lawrence

Chuck S

Cade Roberts

Konner Moshier

robsys

Allen LaMarche

Tristin Drury

Sam Tebcherany

khood

Jonathan Williams

Chris Norris

ACEIND

ACEIND

Share This Page