Request For Quote- Titanium & Stainless

Paul Hahn

New Member
Would like TURNKEY Quote on the following parts out of Titanium Tubing, Titanium Bar stock & Stainless Bar stock.

50QTY-----Tubes(Currently Using 1.6250" diameter 0.0700" thick titanium tubing)
50QTY-----End Cap(Currently Using 1.625" Titanium Bar)
50QTY-----Adapter Ring(Currently Using 1.625" Titanium Bar)
100QTY-----.625" Storage Cups(Currently Using 1.625" 316 Stainless Bar)
300QTY-----.475" Storage Cups(Currently Using 1.625" Titanium Bar)

Would like to get a sample batch of 5qty Tube, 5qty End Cap, 5qty adapter ring & 10qty .700 Stainless storage cups, 30qty .450 Titanium storage cups to verify quality and fitment before placing the full above order.
If parts check good we will place a full order and this will be a common reoccurring order going forward.

Please send all quotes and questions to paul@texasturning.com

USA MACHINE SHOPS ONLY!
 

Attachments

  • 450 Step Cone.pdf
    15 KB · Views: 56
  • 700 step cone.pdf
    14.9 KB · Views: 29
  • ADAPTER .pdf
    13.3 KB · Views: 30
  • CAN.pdf
    10.9 KB · Views: 25
  • END CAP.pdf
    33 KB · Views: 25

Paul Hahn

New Member
Pictures of the product.
 

Attachments

  • IMG_5183.jpg
    IMG_5183.jpg
    41.1 KB · Views: 28
  • IMG_5182.jpg
    IMG_5182.jpg
    48.8 KB · Views: 26
  • IMG_5181.jpg
    IMG_5181.jpg
    45.5 KB · Views: 20
  • IMG_5180.jpg
    IMG_5180.jpg
    40.7 KB · Views: 16
  • IMG_5179.jpg
    IMG_5179.jpg
    50 KB · Views: 15
  • IMG_5178.jpg
    IMG_5178.jpg
    44.4 KB · Views: 14
  • IMG_5177.jpg
    IMG_5177.jpg
    55.3 KB · Views: 15
  • IMG_5176.jpg
    IMG_5176.jpg
    43.8 KB · Views: 16
  • IMG_5175.jpg
    IMG_5175.jpg
    45.8 KB · Views: 23

J&LMachining

New Member
Be careful these can be deemed Supressors by the ATF. You have to have a 07 FFL and SOT to legally produce these. Don't be surprised if you get a visit from the ATF of you get the bid for these.
 

Paul Hahn

New Member
Be careful these can be deemed Supressors by the ATF. You have to have a 07 FFL and SOT to legally produce these. Don't be surprised if you get a visit from the ATF of you get the bid for these.
You do not have to have an SOT or 07 as these are not suppressor components.
You should most likely do some research before putting out non factual info.
Thanks for your reply though.
 

J&LMachining

New Member
They can very well be deemed that. I am a FFL holder so yes I do know and this is factual information. You want to have the ATF knocking at your door be my guest. I'm just trying to keep the people that have no idea of of potential trouble.
 

J&LMachining

New Member
You do not have to have an SOT or 07 as these are not suppressor components.
You should most likely do some research before putting out non factual info.
Thanks for your reply though.
Excuse me they are known better as solvent traps or storage cups as you are trying to call them. ‍♂️
 

Paul Hahn

New Member
They can very well be deemed that. I am a FFL holder so yes I do know and this is factual information. You want to have the ATF knocking at your door be my guest. I'm just trying to keep the people that have no idea of of potential trouble.
I am an 07/SOT.
These parts manufactured to print are nothing more then machined parts.
 

J&LMachining

New Member
So then you know exactly what they can become and are putting unknowing shops at risk of being raided to manufacture your form 1 suppressor parts. Pretty shady if you ask me. Good luck
 

Paul Hahn

New Member
So then you know exactly what they can become and are putting unknowing shops at risk of being raided to manufacture your form 1 suppressor parts. Pretty shady if you ask me. Good luck
The answer to your own concerns is in your above statement.
Like I said, they are nothing more then machined parts when manufactured to print.
You really should read up and get your facts straight rather than spew out hear-say due to ignorance.

Do our industry a favor and get some more education on the maters at hand.

If you want to quote the parts please do so, if not please move on.
 
Top