4'x8' Router time

Status
Not open for further replies.

wcarrothers1

New Member
Hello...

I'm in the Detroit Mi area and have been running my CNC Router mill for a couple of years now mostly doing personal items, vcarving signs ect.... Time is available on the system for cutting a variety of projects you might have. Feel free to contact me with any Router Mill related milling jobs.

Also have my own Series 1 CNC Bridgeport available for heavier metal CNC jobs.

You can catch a photo of my mill (before it was fitted with the VFD spindle) and some objects I regularly make with it here:
http://users.ameritech.net/watchdogflyball/JumpSets.htm

General router mill specs:
3hp VFD spindle
Travel: 50"X, 101"Y, 8-10" Z
~10" gantry clearance
Close tollerences are no problem (letters on those engraved pannels were less then 2.5mm tall)

Feel free to contact me at:
wcarrothers@ameritech.net

Thanks
William Carrothers
 

Attachments

  • DSCF0184.jpg
    DSCF0184.jpg
    81.9 KB · Views: 47
  • P2250015.jpg
    P2250015.jpg
    31.9 KB · Views: 25
  • P3270032.jpg
    P3270032.jpg
    46.3 KB · Views: 28
  • P3270029.jpg
    P3270029.jpg
    30.9 KB · Views: 26

wcarrothers1

New Member
Work examples...

just turned out some 3d parts (Runner Planks for a DN iceboat)...

In anycase still have open machine time avaliable for projects...

www.Sintrasigns.com

b.
 

Attachments

  • PIC_0040.jpg
    PIC_0040.jpg
    29.2 KB · Views: 21
  • PIC_0044.jpg
    PIC_0044.jpg
    23.4 KB · Views: 18

wcarrothers1

New Member
update 2-11-09

Having some good success getting local work (south east Michigan) for the router mill.

New updates include:
Software upgrades to Vectric’s Aspire software package. This package is capable of generating 3d surfaces and paths for complex 3d shapes. Capable of fully rendering the finish part before cutting and more…

See examples here http://users.ameritech.net/watchdogflyball/3DPlaqueDetails.htm

Also check out the new carving catalog on my site:
http://users.ameritech.net/watchdogflyball/CarvingsCatalog.htm

Contains many examples of 3d carvings I can run on the machine.

Also have the CNC Bridgeport available for more metal/prototype work as well as the smaller CNC round pole mill..

Need a prototype or some short run items, sign componants, 3d Carvings please visit

www.sintrasigns.com

or email me

wcarrothers@ameritech.net

b.
 
Status
Not open for further replies.
Top