Ableton_Crazy
New Member
I am looking for a machine shop to fabricate a faceplate for me out of aluminum.
There are 2 plates, Both are 211mm x 411mm. One plate is the bottom plate designed with holes for mounting hardware along with cut outs for buttons to come through. The top plate will have the holes for the buttons, and 4 holes on the corners to mount to the bottom plate.
The bottom plate with th holes, the top of the plate will need to have the holes countersunk to allow 3mm flathead screws to be flush.
Clear anodizing is fine.
Both plates will need to be 4.5mm thick.
Aluminum will need to be supplied by the shop and included in the quote. (Anodized and or Brushed on the top of the top plate)
I'm looking to have this done as soon as possible.
Here are my PDFs for both plates.
I have CAD .dwg files for both also upon request
There are 2 plates, Both are 211mm x 411mm. One plate is the bottom plate designed with holes for mounting hardware along with cut outs for buttons to come through. The top plate will have the holes for the buttons, and 4 holes on the corners to mount to the bottom plate.
The bottom plate with th holes, the top of the plate will need to have the holes countersunk to allow 3mm flathead screws to be flush.
Clear anodizing is fine.
Both plates will need to be 4.5mm thick.
Aluminum will need to be supplied by the shop and included in the quote. (Anodized and or Brushed on the top of the top plate)
I'm looking to have this done as soon as possible.
Here are my PDFs for both plates.
I have CAD .dwg files for both also upon request
Last edited: