I am needing 1 inch slots that are 1/4" wide. 1/4" from the top the slots are started for the the 1" length.
I will supply the acrylic.
11" x 5-1/8" .118" thickness material (Blanks pre-cut) Your just slotting the 1" x 1/4" holes.
Chip free routed holes. Can be cut with either 4Flute Carbide 1/4" or 2Flute Carbide. If this is quoted reasonable many more variations will likely be done. Please quote for 50 pieces and 100 pieces.
Thanks,
Zak
I will supply the acrylic.
11" x 5-1/8" .118" thickness material (Blanks pre-cut) Your just slotting the 1" x 1/4" holes.
Chip free routed holes. Can be cut with either 4Flute Carbide 1/4" or 2Flute Carbide. If this is quoted reasonable many more variations will likely be done. Please quote for 50 pieces and 100 pieces.
Thanks,
Zak