1) Material type
5/8 ballscrew provided
2) Is a material quote required or is material supplied.
material supplied
3) Quantity
1
4) Drawings should be immediately available or necessary specs.
Will provide drawing if requested.
5) Required time frame
2-3 weeks
6) RFQ ending time
When I find a taker.
7) Full contact information should be supplied upon first contact by email from both parties, neither should have to reply to @.com
8) If you the RFQ poster needs help in some of the technical areas then that should be made know initially.
9) Make known any special treatments/finishes not necessarily related to the machining process.
This request is for one single piece (hobbyist project), I will provide the 5/8"-0.2 ballscew (about 2ft long). I need the following done (I can provide a CAD drawing):
End #1: journal for an 8mm ID ball bearing (slip fit), length about 3/8".
End #2: journal for a 10mm ID ball bearing (slip fit - l=0.315"), followed by a 3/8" shoulder (l=1"), then a 3/8"-24 thread (l=3/8").
I am located in MA.
Thanks,
Chafik
5/8 ballscrew provided
2) Is a material quote required or is material supplied.
material supplied
3) Quantity
1
4) Drawings should be immediately available or necessary specs.
Will provide drawing if requested.
5) Required time frame
2-3 weeks
6) RFQ ending time
When I find a taker.
7) Full contact information should be supplied upon first contact by email from both parties, neither should have to reply to @.com
8) If you the RFQ poster needs help in some of the technical areas then that should be made know initially.
9) Make known any special treatments/finishes not necessarily related to the machining process.
This request is for one single piece (hobbyist project), I will provide the 5/8"-0.2 ballscew (about 2ft long). I need the following done (I can provide a CAD drawing):
End #1: journal for an 8mm ID ball bearing (slip fit), length about 3/8".
End #2: journal for a 10mm ID ball bearing (slip fit - l=0.315"), followed by a 3/8" shoulder (l=1"), then a 3/8"-24 thread (l=3/8").
I am located in MA.
Thanks,
Chafik
Last edited: