quentinlong
New Member
Hi.
I'm looking at getting a number of muzzle brake designs machined. The outcome is an ongoing requirement for these to be produced in small runs - 10 or so at a time. Depending on sales, this could eventually become more.
Material type: mild steel for the prototype. Production run will be 400 series S/S
Quote includes material, and shipping to New Zealand.
Quantity: 1
Required in: 4 weeks
RFQ ending time: 3/8/2014
Requirement for 8.9mm bore to be concentric with 3/8 x 24 threads. Dimension are metric with the exception of the threading.
Being a part for use on a rifle, this will probably exclude any US manufacturers that do not have a firearms export permit.
Attached is a link to the DXF file for cutting the ports.
https://s3-ap-southeast-2.amazonaws.com/muzzlebrake/MUZZLE+BRAKE.DXF
I'm looking at getting a number of muzzle brake designs machined. The outcome is an ongoing requirement for these to be produced in small runs - 10 or so at a time. Depending on sales, this could eventually become more.
Material type: mild steel for the prototype. Production run will be 400 series S/S
Quote includes material, and shipping to New Zealand.
Quantity: 1
Required in: 4 weeks
RFQ ending time: 3/8/2014
Requirement for 8.9mm bore to be concentric with 3/8 x 24 threads. Dimension are metric with the exception of the threading.
Being a part for use on a rifle, this will probably exclude any US manufacturers that do not have a firearms export permit.
Attached is a link to the DXF file for cutting the ports.
https://s3-ap-southeast-2.amazonaws.com/muzzlebrake/MUZZLE+BRAKE.DXF
Last edited: