Request For Quote- Simple 4130 spindle

[amurphysmu]

I need two of these parts. One of the parts should have left hand threads and the other part needs right hand threads. The material is 4130, but a similar alloy will work if it easier to deal with.

 

[woody]

Spindle dimensions

Hi,

Three questions.
Is the v-groove just for thread relief ?
I need either the angle of taper or the
diameter at the large end of the taper.

The diameter of the snap ring - RD9

Woody

 

[steinketool]

can I c'drill ends to grind bearing surface between centers(should be done)and turn
taper.

 

[steinketool]

can I c'drill ends to grind bearing surface between centers(should be done)and turn
taper.

I need two of these parts. One of the parts should have left hand threads and the other part needs right hand threads. The material is 4130, but a similar alloy will work if it easier to deal with.[/QUOT