Have tried posting this several times, and it has not appeared on the board. Was hoping to find these parts already made, but not having any luck. I believe they could be made from stock tubing, but not sure. Need quotes on 100, 500, and 1000 pieces of each part. Not in a huge rush, maybe sometime in the next few weeks. Dont have drawings, but they are such simple parts I find it unnecessary. Any questions can be PM directly to me. Thanks for your time.
Mild steel
.5" ID, .625"OD, 1.625" Length
.5" ID, .625"OD, 1.3" Length
.437" ID, .562" OD, 1.187" Length
.437" ID, .562" OD, .625" Length
Cheap aluminum
.25" ID, .5" OD, .312" Length
.25" ID, .5" OD, .625" Length
Tolerances Length= .01
ID= .01
OD= stock material is fine
Quantities 100, 500, 1000 each
Mild steel
.5" ID, .625"OD, 1.625" Length
.5" ID, .625"OD, 1.3" Length
.437" ID, .562" OD, 1.187" Length
.437" ID, .562" OD, .625" Length
Cheap aluminum
.25" ID, .5" OD, .312" Length
.25" ID, .5" OD, .625" Length
Tolerances Length= .01
ID= .01
OD= stock material is fine
Quantities 100, 500, 1000 each