Cpt.Planet
New Member
1) Stainless Steel 1/16 inch thick
2) Material supplied by you
3) 4 of each
4) Check drawings for specs in MM. Tolerances are +- .1mm
5) 2 weeks
6) 20 days
7) mrjake22@gmail.com
8) Edges must not be sharp
Solidworks part files are available upon request.
On both the 8 small holes are 2-62 or #50. The sets of holes are 58.5mm x 58.5mm the second set of holes are 53.5mm x 53.5 mm if you cant see from drawing.
The larger holes on gpurev5.pdf are 6-32 #36. The one square is 33.02mm wide x 55.626mm high
Any questions or anything I missed please email me
2) Material supplied by you
3) 4 of each
4) Check drawings for specs in MM. Tolerances are +- .1mm
5) 2 weeks
6) 20 days
7) mrjake22@gmail.com
8) Edges must not be sharp
Solidworks part files are available upon request.
On both the 8 small holes are 2-62 or #50. The sets of holes are 58.5mm x 58.5mm the second set of holes are 53.5mm x 53.5 mm if you cant see from drawing.
The larger holes on gpurev5.pdf are 6-32 #36. The one square is 33.02mm wide x 55.626mm high
Any questions or anything I missed please email me