Need 2 pieces of the attached drawing in 3-4 weeks.
All dimensions are in mm, with a 0.1mm tolerance if not noted.
Part is about 50mmx54mmx12.5mm (roughly 2" x 2-1/8" x 1/2"), surfaced on all sides.
Model is in Solidworks, will provide any format that Solidworks can export for the job.
Thanks,
Chafik
(Acton MA, USA)
All dimensions are in mm, with a 0.1mm tolerance if not noted.
Part is about 50mmx54mmx12.5mm (roughly 2" x 2-1/8" x 1/2"), surfaced on all sides.
Model is in Solidworks, will provide any format that Solidworks can export for the job.
Thanks,
Chafik
(Acton MA, USA)