small knurled, threaded knobs needed

Status
Not open for further replies.
D

dkbgs

New Member
6061-T6 rod
.620" od with medium hatched knurling. Parts are .625" long, drilled through 3/32" and internally threaded 4-40 at one end, drilled .125" dia x .3" deep at other. Threaded end of knob has a 2.5 degree point/camfer, other end has a dome radius of 1 1/2" approximately. Concentricity must be within .002, length and OD within .005"
Knurling must look good!
Vibratory finish and degreased

200 - 1000 parts depending on price

Local to Portland, OR is encouraged!
Thanks
email me: david(at)kingbass(dot)com
 

Attachments

  • knob1.jpg
    knob1.jpg
    15.1 KB · Views: 324
Last edited:
I

ironman

New Member
dkbgs said:
6061-T6 rod
.620" od with medium hatched knurling. Parts are .625" long, drilled through 3/32" and internally threaded 4-40 at one end, drilled .125" dia x .3" deep at other. Threaded end of knob has a 2.5 degree point/camfer, other end has a dome radius of 1 1/2" approximately. Concentricity must be within .002, length and OD within .005"
Knurling must look good!
Vibratory finish and degreased

200 - 1000 parts depending on price

Local to Portland, OR is encouraged!
Thanks
email me: david(at)kingbass(dot)com
Click to expand...
I can do it on the screw mach. for $ 1.10 ea plus shipping. Eric Laycock, Laycock Tool.:)
 
E

easyvalk

T&E Precision Tooling
QTY. 200 = $1.75 each plus shipping
QTY. 1000 = $0.95 each plus shipping
Need drawing or can make per picture with demensions as specified
Quote material and labor to machine complete per drawing.
Everett Pendergrass
T&E Precision Tooling
865-435-1509 phone
865-435-1576 fax
 
M

machineguy

New Member
Hi I can machine these for $1.20 ea qty 200 or $1.00 ea qty 1000 plus shipping.I would like a drawing and time frame for completion if awarded the bid.
Thanks
Cutting Edge Machine
 
J

Jeff3

New Member
dkbgs said:
6061-T6 rod
.620" od with medium hatched knurling. Parts are .625" long, drilled through 3/32" and internally threaded 4-40 at one end, drilled .125" dia x .3" deep at other. Threaded end of knob has a 2.5 degree point/camfer, other end has a dome radius of 1 1/2" approximately. Concentricity must be within .002, length and OD within .005"
Knurling must look good!
Vibratory finish and degreased

200 - 1000 parts depending on price

Local to Portland, OR is encouraged!
Thanks
email me: david(at)kingbass(dot)com
Click to expand...
I run a job close to this one.
200 + for $0.95 plus shipping
1000 + for $0.65 plus shipping

Jeff Thompson
Alpha Machining, Inc
904-276-6131
904-276-6132 Fax
 
M

marto74

New Member
We are from Bulgaria

dkbgs said:
6061-T6 rod
.620" od with medium hatched knurling. Parts are .625" long, drilled through 3/32" and internally threaded 4-40 at one end, drilled .125" dia x .3" deep at other. Threaded end of knob has a 2.5 degree point/camfer, other end has a dome radius of 1 1/2" approximately. Concentricity must be within .002, length and OD within .005"
Knurling must look good!
Vibratory finish and degreased

200 - 1000 parts depending on price

Local to Portland, OR is encouraged!
Thanks
email me: david(at)kingbass(dot)com
Click to expand...
We can do this parts for you if it's not a problem that we are from Europe

Regards: Martin
 
M

Metalmog

New Member
dkbgs said:
6061-T6 rod
.620" od with medium hatched knurling. Parts are .625" long, drilled through 3/32" and internally threaded 4-40 at one end, drilled .125" dia x .3" deep at other. Threaded end of knob has a 2.5 degree point/camfer, other end has a dome radius of 1 1/2" approximately. Concentricity must be within .002, length and OD within .005"
Knurling must look good!
Vibratory finish and degreased

200 - 1000 parts depending on price

Local to Portland, OR is encouraged!
Thanks
email me: david(at)kingbass(dot)com
Click to expand...

Make similar parts & fasteners, located Vancouver, BC. Mainly out of 303 stainless and brass.

Material: 6061-T6 (included)
Finishing: Vibratory. (not really required if as shown in pictures, parts come off machine cleanly unless high shine required, such as in mirror polished)
Surface treatment: Non, other than mineral degreasing (but not clean enough for electroplating or anodizing). Recommend a light coating of preservative to prevent oxidation during shipping and storage.
Accuracy: much better than required.

Need Thread class of fit and delivery time?

Qty - Price
200 - US$1.00
1000 - US$0.62
5000 - US$0.52
Delivery 8 weeks from receipt of order unless otherwise required. Valid for 30 days.
 
V

versa1

New Member
Response

I would be interested in building these parts for you, have you awarded yet?
Contact me: versautility@yahoo.com


dkbgs said:
6061-T6 rod
.620" od with medium hatched knurling. Parts are .625" long, drilled through 3/32" and internally threaded 4-40 at one end, drilled .125" dia x .3" deep at other. Threaded end of knob has a 2.5 degree point/camfer, other end has a dome radius of 1 1/2" approximately. Concentricity must be within .002, length and OD within .005"
Knurling must look good!
Vibratory finish and degreased

200 - 1000 parts depending on price

Local to Portland, OR is encouraged!
Thanks
email me: david(at)kingbass(dot)com
Click to expand...
 
Status
Not open for further replies.
Top