Request For Quote- Small sheet part

Status
Not open for further replies.
T

TobyH

New Member
View attachment 2703

I'm looking for a quote on the attached part.

Material can be either aluminum or steel. If aluminum, it would need to be 1/8" thick 6061 or so, and if steel it would need to be 12ga

I'm looking for pricing in batches of 4 (4 parts = 1 set), so 1 set, 5 sets, 10 sets, or any other number if you think the price would be better.

Dimensions are in mm, the holes should be 5.5mm and 4.5mm diameter. Overall size is 120mm x 81.75mm
 
A

ap machine works

New Member
I'm unable to open the attachment on either my phone or computer. If you can post a .jpg we could get a quote to you.

Thanks

B. Paige Caudell
AP Machine Works llc
Huron SD
 
J

Jack ISEN

New Member
Hello Toby,



Thanks,
Jack

Thanks,
Jack


TobyH said:
View attachment 2703

I'm looking for a quote on the attached part.

Material can be either aluminum or steel. If aluminum, it would need to be 1/8" thick 6061 or so, and if steel it would need to be 12ga

I'm looking for pricing in batches of 4 (4 parts = 1 set), so 1 set, 5 sets, 10 sets, or any other number if you think the price would be better.

Dimensions are in mm, the holes should be 5.5mm and 4.5mm diameter. Overall size is 120mm x 81.75mm
Click to expand...
 
U

urbnsr

New Member
Toby,

I have tried to PM you many times this weekend, but am getting an error from the website. Will contact you via email

Thanks...
Paul
P.S.> File opens fine here.
 
Last edited:
Status
Not open for further replies.
Top